Home » Product Category » Microscope » Metallographic Microscope » Upright Material Analysis Metallographic Microscope INTJ-L11

loading

Share to:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
sharethis sharing button

Upright Material Analysis Metallographic Microscope INTJ-L11

INTJ-L11 series transparent and reflective upright metallographic microscope is suitable for microscopic observation of opaque or transparent objects. The instrument is equipped with falling and transmission lighting system, long-range flat field achromatic objective lens (without cover glass), large field eyepiece and built-in polarization observation device. So it has the characteristics of clear image, good contrast and convenient operation. It is an ideal instrument for the research of biology, metalology, mineralogy, precision engineering and electronics. It is suitable for schools, scientific research, factories etc.
Availability:
Quantity:
  • INTJ-L11

  • CAIDAO


Material analysis microscope INTJ-L11 series

INTJ-L11 series transparent and reflective upright metallographic microscope is suitable for microscopic observation of opaque or transparent objects. The instrument is equipped with falling and transmission lighting system, long-range flat field achromatic objective lens (without cover glass), large field eyepiece and built-in polarization observation device. So it has the characteristics of clear image, good contrast and convenient operation. It is an ideal instrument for the research of biology, metalology, mineralogy, precision engineering and electronics. It is suitable for schools, scientific research, factories etc.  


Performance characteristics

1. Equipped with large field eyepiece and long distance flat field achromatic objective lens (without cover glass), the field of view is large and clear.

2. Coarse micro motion coaxial focusing mechanism, coarse dynamic tightness adjustable, with locking and limiting device, micro motion grid value: 2μm。

3. It is equipped with two sets of illumination systems, falling and transmission, which can respectively observe opaque objects or transparent objects.

4. 6V20W halogen lamp, brightness adjustable.

5. Three eye lens barrel, which can freely switch between normal observation and polarizing observation, and can carry out 100% light transmission photography.


Observation system

Hinged observation tube: Three eye observation tube, which is with single visibility adjustable and lens tube 30 ° inclined, can be connected with photography and camera devices.

Eyepiece: WF10x large field flat eyepiece with field of view range φ 18mm, which provides a wide and flat observation space. 10X dividing eyepiece, field of view range φ 18mm for center correction.


Upright Material analysis metallographic microscope INTJ-L11 (3)

Mechanical stage

Double layer mechanical stage, size: 185mm ✕ 140mm, moving range: 75mm ✕ 50mm, moderate design concept, more convenient and comfortable for users to operate the stage.

Upright Material analysis metallographic microscope INTJ-L11 (4)

Drop lighting system

6V 20W halogen lamp with brightness adjustable, built in field stop, aperture stop, (yellow, blue, green, frosted glass) color filter conversion device, push-pull polarizer.


Upright Material analysis metallographic microscope INTJ-L11 (5)

Transmission lighting system

Built in halogen lamp lighting device: 6V 20W halogen lamp (adjustable brightness) is adopted, which can provide clear and distinct microscopic observation image.

Light collector: light collector with field aperture.

Condenser: Abbe condenser N.A.1.25 is adjustable up and down.

Upright Material analysis metallographic microscope INTJ-L11 (6)

Photographic observation

High definition digital recording and camera observation mode can be realized by configuring camera observation accessories (CCD connector, digital camera connector, digital SLR camera connector, etc.).

Upright Material analysis metallographic microscope INTJ-L11 (7)

Effect drawing of digital photography

Upright Material analysis metallographic microscope INTJ-L11 (8)

Polarizing observation                      Bright field observation

Parameters

Standard configuration

Eyepiece

Wide field WF10X(Φ18mm)

Objective lens

Long distance flat achromatic objective (without cover glass) PL 5X/0.12

Long distance flat achromatic objective (without cover glass) PL L10X/0.25

Long distance flat achromatic objective (without cover glass) PL L40X/0.60

Long distance flat achromatic objective (without cover glass) PL L60X/0.75 (spring)

Eyepiece tube

Three eyepieces, tilt 30 ˚, (built in polarizer for switching)

Drop lighting system

6V 20W halogen lamp, brightness adjustable

Drop illuminator with field light bar, aperture light bar, polarizer, (yellow, blue, green) color filter and frosted glass

Focusing system

Coarse fretting coaxial focusing, fretting grid value: 2 μ m. The coarse dynamic tightness is adjustable, with locking and limiting devices

Converter

Four holes (inward ball positioning)

Five holes (inward ball positioning)

Stage

Double layer mechanical mobile type (size: 185mmx140mm, moving range: 75mmx50mm)

Transmission lighting system

Abbe condenser N.A.1.25 can be lifted up and down

Blue filter and frosted glass

Light collector, suitable for halogen lamp

6V 20W halogen lamp, brightness adjustable



Optional

Eyepiece

Wide field eyepiece WF16X(Φ11mm)

Dividing eyepiece 10X(Φ18mm), grid value 0.1mm/grid

Objective lens

Long distance flat achromatic objective (without cover glass) PL L 50X/0.70

Long distance flat achromatic objective (without cover glass) PL L 80X/0.80

Long distance flat achromatic objective (without cover glass) PL L 100X/0.85 (spring)

Flat achromatic objective (without cover glass) PL 100X/1.25  (spring, oil)

Color filter

Green color filter

Yellow color filter

CCD connector

0.4X

0.5X

1X

0.5X with dividing ruler, grid value 0.1mm/grid

Camera

DV-1 with USB and video output

DV-2 (USB output 1.30/3/5/10 million pixels)

DV-3 with video output

Camera device

2.5X/4Xzoom camera with 10Xviewfinder eyepiece

4X Focusing camera

MD clasp

PK clasp

Digital camera connector

CANON(A610,A620,A630,A640)


System diagram

Upright Material analysis metallographic microscope INTJ-L11 (9)

Overall dimension

Upright Material analysis metallographic microscope INTJ-L11 (1)


Previous: 
Next: 

About Us

Caidao has become a national high-tech enterprise in high-end optical image measurement and various inspection instruments, CMM, and AOI automatic testing equipment research and development, production and sales services.

Quick Links

Products

Leave A Message
Copryright  2022 Jiangsu Caidao Precision Instrument Co., Ltd.ALL RIGHTS RESERVED. Sitemap | Supported by leadong.com